Table of Contents
Advertisement
2-7 Lens (optional)
A19
8.7BW
t
r
e
w
A19x8.7BW
(A19x8.7BRRM-39)
1:1.8/8.7-165
MADE IN JAPAN
FUJIN0N
by
FUJI PHOTO OPTICAL CO., LTD.
QUICK Z
or RET
W
T
y u
i
o
!6 !7
FOCUS ring
1
Manual focus ring.
ZOOM lever/ring
2
This is the manual zoom ring equipped with a zoom lever. To
activate the zoom feature on, turn the zoom mode knob
position "M".
IRIS ring
3
Manual Iris ring. To activate the auto iris feature, set the Iris
Mode switch
to A.
10
Macro lever
4
Pull this lever up to enable the rotation of the macro ring.
Macro focusing ring (for close-up shooting)
5
By rotating this ring in the direction of the arrow, the lens be-
comes capable of close-up shooting of very small objects.
Normal focus adjustment and zooming are not available in the
macro mode.
To shoot images in the macro mode, set the focus ring to the
infinite position and the zoom ring to the widest angle position.
2. CONTROLS, INDICATORS AND CONNECTORS
q
mm
M
A
!0
!1
C
!2 !3
!4
!5
To adjust the focus of the macro image, rotate this ring in the
direction of arrow until the object is focused.
Note :
The back-focus knob is located close to the macro ring, be
careful not to mistake the back-focus knob for the macro ring.
After the required operation, be sure to return the macro ring
to the normal position.
BACK FOCUS ring/fixing screw
6
For Set-up Back Focus adjustment only.
Secure with the Screw knob after adjustment.
[VTR] trigger button
7
To start shooting push once.
To stop shooting push again.
[RET] return video button
8
The return video signal from the VCR section can be moni-
tored on the viewfinder only while pushing this button.
• The Viewfinder Status display is not available during this operation.
ZOOM servo control lever
9
Pushing this lever in the W direction makes the lens move
wider.
Pushing this lever in the T direction makes the lens move tighter.
Pushing harder changes the speed of the Zoom. To operate the
servo zoom feature with this lever, set the ZOOM knob
IRIS mode switch
10
A : Activates the auto iris feature.
M : Allows manual iris control.
Momentary auto iris button
11
When the IRIS MODE switch
activates the Auto Iris Function while it is held down only.
ZOOM mode knob
12
S : Servo Zoom mode. Allows operation by the Zoom Servo
Control lever
M : Manual Zoom mode. Allows zoom control by the Zoom
lever/ring
2
REMOTE FOCUS control connector
13
To connect with an optional focus servo unit.
ZOOM servo connector
14
Connect with an optional zoom servo unit.
Aspect ratio switching lever
15
Switches the aspect ratio between 4:3 and 16:9.
Note :
to
12
Make sure to switch the lever to the correct position.
Rapid zoom setting switch
16
Quickly sets the zoom to telescopic mode.
For the setting method, refer to the "OPERATION MANUAL"
for the lens.
IRIS speed adjusting control
17
Adjusts the iris operation speed.
Memo :
If the speed becomes too fast, hunting may occur.
To avoid the phenomena described above, perform
adjustment again.
is at M, pushing this button
10
.
9
.
to S.
12
23
Advertisement
Table of Contents
