Preparing To Transfer The Printer; Printer Relocation - Canon imagePROGRAF iPF9400S Basic Manual

Preparing to Transfer the Printer

Printer Relocation

Printer Relocation
Preparing to Transfer the Printer
Preparing to Transfer the Printer
Preparing to Transfer the Printer .................................................................................................................. 74
Reinstalling the Printer .................................................................................................................................. 80
Preparing to Transfer the Printer
Preparing to Transfer the Printer
To protect the internal parts in transit, always follow these steps before transferring the printer to a new location.
Refer to the Setup Guide for details on packing the printer and installing it after transfer.
•
Be sure to contact your Canon dealer before transferring the printer to a new location. Ink may leak and damage the
printer if you do not prepare the printer correctly and it is tipped or stood on end in transit.
Important
•
Depending on the state of the printer, part replacement may be necessary when preparing to transfer the printer (that is,
when you execute the printer menu item to prepare for transfer).
Note
•
Ink must be drawn into the Maintenance Cartridge before Level 2 or Level 3 printer transfer, as described in the following
table. Prepare the Maintenance Cartridge in advance.
•
Always follow the instructions of the service representative when transferring the printer under Level 3 conditions.
Level
1
2
3
*1: This is the number of new Maintenance Cartridge s required when you execute the Prep.MovePrinter menu.
*2: If a message instructing you to replace the Maintenance Cartridge is displayed on the Display Screen, the Main-
74
Shipping Method (Ex-
ample)
By truck Lengthwise: 0–30º
Rotation: 0–10º
By plane All directions: 0–30º
Tipping the printer Lengthwise: 0–90º
or holding it upright Rotation: 0–30º
for elevators or
stairs
The number varies depending on the amount remaining in the Maintenance Cartridge being used.
tenance Cartridge needs to be replaced.
Permitted Angle of Inclination
iPF9400S
Required
Amount of Ink to
Maintenance
Dispose of
Cartridges( *1 )
0 0( *2 )
Approx. 1,900 ml 2 or 3
(64.3 fl oz)
Approx. 1,900 ml 2 or 3
(64.3 fl oz)
Basic Guide