Reinstalling The Printer - Canon imagePROGRAF iPF9400S Basic Manual

Reinstalling the Printer

8
Remove the Stand by reversing the installation procedure, when it was attached to the printer.
9
Disassemble and repackage the Stand by following the installation procedure (with six people lifting the
printer) in reverse.
Important
10
Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package them in a
shipping box.
Reinstalling the Printer Reinstalling the Printer
The basic workflow for reinstalling the printer is as follows.
For detailed instructions, see the Setup Guide.
Assemble the stand
1
Referring to the Printer Stand Setup Guide, assem-
ble the Stand.
•
Caution
•
Install the printer
1
Mount the printer on the assembled Stand and tight-
en the screws firmly.
80
•
Do not use the procedure for rotated installation (installing by rotating the printer). This may damage the print-
er. For details, see Setup Guide.
The Stand must be assembled by at least two people on a flat surface. Attempting assembly by yourself poses
a risk of injury or bending the Stand.
When assembling the Stand, lock the casters. In addition, always unlock the casters before moving the as-
sembled Stand. Attempting to move the stand when the casters are locked poses a risk of injury or damage to
the location site.
iPF9400S
Basic Guide