Canon imagePROGRAF iPF9400S Basic Manual page 10

Attaching the Roll Holder to Rolls
1
Lift the Holder Stopper lever (a) from the shaft side
to unlock it. Holding the Holder Stopper at the posi-
tion indicated (b), remove it from the Roll Holder.
2
Insert the respective attachments for the roll paper core on the Roll Holder and Holder Stopper.
• Using rolls with a 2-inch paper core
Align the tips (a) of the 2-Inch Paper Core Attachment with the holes (b) of the Holder Stopper and insert it
firmly.
• Using rolls with a 3-inch paper core
Align the tips (a) of 3-Inch Paper Core Attachment #2 with the
holes (b) of the Holder Stopper and insert it firmly.
10
Holder Stopper Side
Holder Stopper Side Roll Holder Side
Align the tips (a) of 3-Inch Paper Core Attachment #1 with the
holes (b) of the Roll Holder and insert it firmly.
iPF9400S
Roll Holder Side
No attachment is
needed.
Basic Guide