Canon imagePROGRAF iPF9400S Basic Manual page 16

Removing the Roll from the Printer
4
Press ▲ or ▼ to select "Yes", and then press the OK button.
The roll is rewound.
Important
5
Open the Top Cover and lift the Ejection Guide.
6
Using both hands, rotate the Roll Holder in the di-
rection of the arrow to rewind the roll.
7
Holding the Roll Holder flange (a), remove the
holder from the Roll Holder Slot.
•
Note
16
If you have selected ManageRemainRoll > On in
•
the Control Panel menu, a barcode is printed on the
leading edge of the roll.
Do not remove the roll before the barcode is printed.
You will be unable to keep track of the amount of roll
paper left. (See "Keeping Track of the Amount of Roll
Paper Left.")
→User's Guide
For instructions on removing the Roll Holder from rolls, see "Removing the Roll Holder from Rolls."
→User's Guide
iPF9400S
Basic Guide