Cannot Print Over Appletalk Or Bonjour Networks - Canon imagePROGRAF iPF9400S Basic Manual

Basic guide
Hide thumbs Also See for imagePROGRAF iPF9400S:
Table of Contents

Advertisement

Cannot print over AppleTalk or Bonjour networks

Cause
The NetWare server and serv-
ices are not configured correctly.
The printer was turned off and
on when not disconnected from
the server.
Cannot print over AppleTalk or Bonjour networks
Cannot print over AppleTalk or Bonjour networks
Cause
The AppleTalk protocol is not en-
abled on the printer.
The computer you are trying to
print from is not configured cor-
rectly.
The computer and printer are not
on the same network.
122
3.
Start NWADMIN or PCONSOLE and confirm that the print service is configured correctly and the
print queue is available.
4.
If data transmission to a printer on another subnet fails, deactivate NCP burst mode in that printer's
network protocol settings.
5.
If the printer is used in queue server mode, specify Other/Unknown as the printer type.
Leave the printer off for at least 30 seconds, and then restore power.
Activate AppleTalk on the printer.
(See "Configuring the Printer's AppleTalk Network Settings.")
Make sure the computer's AppleTalk settings are configured correctly.
(See "Configuring the Destination for AppleTalk Network (Macintosh).")
(See "Configuring the Destination for Bonjour Network (Macintosh).")
Due to the nature of Bonjour, you cannot print if the printer is on another network behind a router.
Make sure the computer and printer are on the same network. For information about network settings,
ask your network administrator.
Corrective Action
Corrective Action
→User's Guide
→User's Guide
→User's Guide
iPF9400S
Basic Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageprograf ipf9400

Table of Contents