Messages Regarding Printing Or Adjustment; Cannot Execute This Command. Use Other Paper - Canon imagePROGRAF iPF9400S Basic Manual

iPF9400S

Messages regarding printing or adjustment

Messages regarding printing or adjustment

Cannot execute this command. Use other paper. ...................................................................................... 141

Cannot adjust printhead. ............................................................................................................................ 144
Cannot calibrate. ........................................................................................................................................ 141
Excessive temperature or humidity. ........................................................................................................... 141
Please execute common calibration. .......................................................................................................... 141
Please commn calibrt using above paper. ................................................................................................. 142
Please calibrate using above paper. .......................................................................................................... 142
Borderless printng not possible. Paper stretched or shrank. ..................................................................... 142
Before borderless printing, move the blue platen switch. .......................................................................... 142
Borderless printng not possible. ................................................................................................................. 137
Blue platen switch is dirty. .......................................................................................................................... 142
Move the blue platen switch No.xx to the right. (xx represents a number) ................................................ 143
Cannot adjust paper feed. .......................................................................................................................... 143
Check printed document. ........................................................................................................................... 143
Cannot execute this command. Use other paper.
Cannot execute this command. Use other paper.
Cause
Paper compatible with
1.
color calibration is not
2.
loaded.
Cannot calibrate.
Cannot calibrate.
Cause
The paper for printing a test pattern is soiled. Other-
wise, you have loaded colored paper.
The test pattern was printed too faintly.
Direct sunlight or strong lighting may be shining on the
printer and causing the sensor to malfunction.
Excessive temperature or humidity.
Excessive temperature or humidity.
Cause
The temperature or humidity where the
printer is installed is out of the acceptable
range for operation.
Please execute common calibration.
Please execute common calibration.
There is not even one Common calibration execution result.
Basic Guide
Press the OK button to clear the error.
Load paper that is compatible with color calibration.
See the Paper Reference Guide.
(See Paper Reference Guide .)
Always make sure the loaded paper matches the type of paper in the printer paper settings. Adjustment cannot
be completed correctly unless the loaded paper matches the settings.
Press ▲ or ▼ to select Stop, and then press the OK button to stop printing.
Use the printer under suitable environmental conditions. Also note that various environmental
conditions are recommended for various types of paper. For details on the recommended en-
vironmental conditions, see the Paper Reference Guide.
(See Paper Reference Guide .)
Press ▲ or ▼ to select Continue, and then press the OK button to continue with color cali-
bration. However, note that correct adjustment may not be possible.
Cause
Corrective Action
Press the OK button to clear the error.
Load unused paper compatible with color calibration.
(See Paper Reference Guide .)
Press the OK button to clear the error.
Take steps to remedy faint printing.
(See "Printing is faint.") →P.110
Press the OK button to clear the error.
Take steps to ensure the printer is not used when exposed to direct sunlight or
strong lighting.
Corrective Action
Cannot execute this command. Use other paper.
Corrective Action
Corrective Action
Execute Common calibration.
141