Canon imagePROGRAF iPF9400S Basic Manual page 41

iPF9400S
14
Close the Top Cover.
Ink now fills the system. It takes about 13 minutes
for ink to fill the system.
•
While ink is being filled, definitely do not remove the Ink Tank or Maintenance Cartridge. Ink may leak out.
Important
•
The procedure is now finished if you have set Rep.P.head Print to Off in the Control Panel menu.
In this case, execute Initial adjustmt in Head Posi. Adj. in the Control Panel menu.
Note
(See "Adjustment When Installing the Printhead.")
15
Feed paper by following the instructions on the Display Screen.
After the paper has advanced, Initial adjustmt in Head Posi. Adj. is executed automatically.
•
When printing fine lines or text at high precision on glossy or semi-glossy photo or proofing paper, set the
optimal Printhead height before aligning the printhead.
Note
(See "Enhancing Printing Quality.")
Basic Guide
→User's Guide
→User's Guide
Replacing the Printhead
41