Execute Printhead Cleaning; Cannot Recognize Print Head X. (X Is L, R, Or Not Displayed) - Canon imagePROGRAF iPF9400S Basic Manual

iPF9400S

Cannot recognize print head x. (x is L, R, or not displayed)

Cannot recognize print head x. (x is L, R, or not displayed)
Cause
No Printhead is installed.
The Printhead cannot be
recognized because it is
not installed correctly.

Execute printhead cleaning.

Execute printhead cleaning.
Cause
The Printhead noz- Follow these steps to clean the Printhead.
zles are clogged.
1.
2.
If the message is still displayed when printing, replace the Printhead.
(See "Replacing the Printhead.")
Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However, note that this error may
affect the printing quality.
If OK is shown on the Display Screen, clean the Printhead.
1.
2.
If the message is still displayed when printing, replace the Printhead.
(See "Replacing the Printhead.")
Basic Guide
Follow these steps to install the Printhead.
1.
Open the Top Cover.
2.
Install the Printhead L if Printhead L is displayed and the Printhead R if Printhead R is displayed. If neither
left or right is indicated, install both Printhead L and Printhead R.
(See "Replacing the Printhead.")
Follow these steps to reinstall the Printhead.
1.
Open the Top Cover.
2.
Reinstall the Printhead L if Printhead L is displayed and the Printhead R if Printhead R is displayed. If nei-
ther left nor right is indicated, re-install both Printhead L and Printhead R.
(See "Replacing the Printhead.")
Stop printing by pressing ▲ or ▼ to select Stop Printing.
Clean the Printhead.
(See "Cleaning the Printhead.")
Press the OK button on the Control Panel to stop printing.
Clean the Printhead.
(See "Cleaning the Printhead.")
Cannot recognize print head x. (x is L, R, or not displayed)
Corrective Action
→P.34
→P.34
Corrective Action
→P.55
→P.34
→P.55
→P.34
145