Roll Paper Cannot Be Inserted Into The Paper Feed Slot - Canon imagePROGRAF iPF9400S Basic Manual

iPF9400S
6
If the paper is not visible, lift the Ejection Guide, re-
move the Roll Holder, and clear the paper jam from
below.
After removing the paper, make sure there are no
other scraps of paper in the printer, and then lower
the Ejection Guide.
7
If the Carriage is on the left, move the Carriage to
the right until it stops.
•
Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may occur when you
turn on the printer.
Important
8
Lower the Release Lever and close the Top Cover.
9
Turn the printer on. (See "Turning the Printer On and Off.")

Roll paper cannot be inserted into the paper feed slot

Roll paper cannot be inserted into the paper feed slot
Cause
The roll paper is warped.
Paper is jammed by the paper feed slot.
The paper source selection is incorrect.
Basic Guide
Corrective Action
Straighten out curls and reload the roll.
Remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet.")
Press the Load button and select the paper source.
Roll paper cannot be inserted into the paper feed slot
→User's Guide
→P.100
→P.103
105