Canon imagePROGRAF iPF9400S Basic Manual page 54

Cleaning Inside the Top Cover
•
Note
3
Using a damp cloth that you have wrung out com-
pletely, wipe inside the Top Cover to clean it. Wipe
away any ink residue and paper dust (debris from
cutting) on the Top Cover Roller (a), all over the
Platen (b), on the Paper Retainer (c), the Border-
less Printing Ink Grooves (d), the Ejection Guide
(e), the cutter guide (f), around the ink suction
holes at left (g), around the Borderless Printing Ink
Grooves at right (h), on the blue Switch (i), and so
on.
•
Warning
Important
54
If the Cleaning Brush is dirty, rinse it in water.
Never use flammable solvents such as alcohol, benzene, or thinner. If these substances come into contact
with electrical components inside the printer, there is a risk of fire or electrical shock.
• Do not touch the Linear Scale (a), Carriage Shaft
(b), or Fixed Blade (c). This may stain your
hands and damage the printer.
•
Do not use a dry cloth to wipe inside the Top Cover. This may create a static charge, which may attract dust
and affect the printing quality.
•
Do not touch the clear sheet on the side of the Top Cover Roller. This may damage the roller.
iPF9400S
Basic Guide