Xerox DocuPrint C2535 A User Manual page 100

4. Place the drum cartridge next to the print
sample on which the colored dots appear to
find the part that needs to be cleaned.
Note
• You must find the part to be cleaned yourself.
• The illustration shows the parts, one to four, to be
cleaned.
• To prevent the light-sensitive drum being
overexposed, do the operation quickly.
5. Align the colored dots printed on the print
sample with the corresponding part of the
drum cartridge. 1 indicates the lateral
position of the colored dots. 2 indicates the
color of the colored dots.
Note
• The graphic shows an example with magenta colored
dots.
6. Determine the position where colored dots
were printed. Then turn the gray-colored
part on the charge roll (black-colored roller)
by rolling it with your finger on its left side to
find the dirt.
7. Clean any dirt from the roller.
Note
• Use a soft cloth, such as cotton for cleaning.
• Make sure nothing touches or scratches the surface of
the light-sensitive drum (green-colored roller) or the
charge roll (black-colored roller).
8. Replace the drum cartridge. Holding the
drum cartridge by the handle with the flat
part facing the back of the printer, align the
plastic guides on both sides of the drum
cartridge with the slots in front of the arrows
on the printer.
100
6 Daily Care
Y
M
C
K
1
2
3
4
1
2