Power Saver Modes - Xerox DocuPrint C2535 A User Manual

1.3

Power Saver Modes

This printer is equipped with the power saver mode 1 and the power saver mode 2 to reduce
power consumption when it is left idle.
When no print data is received for 3 minutes, the printer will enter the power saver mode 1.
When no data is received for a further 5 minutes (a total of 8 minutes lapse (default) since
the last receiving data), it will enter the power saver mode 2 by default.
The data stored in the RAM disk is erased when the printer is switched off. The time ranges
to specify for the printer to go into the power saver mode 1 or the power saver mode 2 are
1 to 60 minutes or 5 to 120 minutes, respectively. Consumption of power during the power
saver mode 2 is 7 W or less and the time required to exit from the power saver mode 2 to
a print-ready status is about 42 seconds.
Note
• You can specify for the printer not to go into power saver mode 2.
• For details on the power saver mode and the procedure to change the settings, refer to "Basic
Operations (Example: Changing the Power Saver Timer)" (P. 46).
Exiting the Power Saver Mode
The printer automatically cancels the power saver mode once it receives data from the
computer.
To cancel the power saver mode 1 or the power saver mode 2 manually, press any button
on the control panel or press the <Power Saver> button, respectively.
17
1.3 Power Saver Modes