Printing On Custom Size Paper - Xerox DocuPrint C2535 A User Manual

3. Click [Custom Paper Size].
4. Use the [Details] list box to select the custom setup you want to define.
5. Specify the length of the short edge and long edge under [Setting For].
You can specify the values either by entering directly or using [ ] [ ].
The length of the short edge cannot be longer than the long edge, even if it is within
the specified range. The length of the long edge cannot be shorter than the short
edge, even if it is within the specified range.
6. To assign a paper name, select the [Name Paper Size] check box, and then enter the
name in [Paper Name]. Up to 14 characters can be used for the paper name.
7. If necessary, repeat steps 4 to 6 to define another custom size.
8. Click [OK].
9. Click [OK].

Printing on Custom Size Paper

The procedure to print on custom size paper using the PCL print driver is as follows.
This section explains the procedure using WordPad on Windows XP as an example.
Note
• The way to print using the PS print driver, refer to the online help for the PS print driver.
• The way to display the printer properties dialog box differs according to the application software. Refer to
the manual of your respective application software.
28
2 Printing
3
4
5
6