Table of Contents
Advertisement
Item
Adjust ColorRegi
Clean Developer
Initialize NVM
Storage Disk
Format Hard Disk
PostScript
Specifies the settings for the PostScript.
Item
PS Error Report
PS Job Time-Out
Init PS Disk
PaperSelect Mode
Correct the color registration manually. For details, refer to the Quick Reference Guide
Adjusting Color Registration.
• [Auto Adjust]
Correct the color registration.
• [Color Regi Chart]
Prints the correction chart.
• [Enter Number]
Enter the number to correct the registration.
While printing is repeated, one color toner may be mixed in another color toner in the
developer. When this occurs, use this feature. Using this feature consumes some toner.
Initializes the settings stored in the NVM except for the network settings. The NVM is a
nonvolatile memory that stores the printer settings even after the power is turned off.
After executing this function and restarting the printer, all the menu parameters are
reset to their default values.
Note
• You cannot execute this menu during printing.
• You need to restart the printer to activate this setting. After making the setting, turn off
the printer and then turn it on again.
Deletes the stored documents in the internal hard disk (optional). This menu is available
when the optional internal hard disk is installed.
Formats the internal hard disk (optional). This menu is available when the optional
internal hard disk is installed.
Specifies whether the printer outputs error contents for a PostScript error. The change
becomes effective after the printer is turned off and then on again.
• [On] (default)
• [Off]
Specifies the execution time for one PostScript job. The change becomes effective after
the printer is turned off and then on again.
• [Off] (default)
• [xx min]
A PostScript error occurs if processing is not completed after the specified time.
Initializes the optional hard disk. This item is only displayed when the optional hard disk
is installed.
Specifies the way to select the tray for PostScript mode. The change becomes effective
after the printer is turned off and then on again.
• [Auto] (default)
The tray is selected as the same setting as in the [PCL] setting.
• [Select FromTray]
The tray is selected in a method compatible with regular PostScript printers.
Description
Description
4.2 Description of Menu Items
55
Advertisement
Table of Contents
Troubleshooting
