6.
MAP FUNCTIONS
6.0
MAX FUNCTIONS MENU
1. Press [MENU], move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].
2. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press [ENT] or move the
ShuttlePoint knob to the right. The MAX Functions menu appears on the screen:
Figure 6.0 - Max Functions Menu
The available Max Functions menu is described in the following.
6.0.0
Zoom Type
Zoom Type refers to the chart scale selection. It has two options: Standard (default) or Flexi-
Zoom. When Zoom Type is set to Flexi-Zoom, a short [ZOOM IN]/[ZOOM OUT] push
causes a change of chart level, while a long [ZOOM IN]/[ZOOM OUT] push (press and hold)
causes an expansion or compression of the chart image, without a chart level change.
Figure 6.0.0 - Zoom Type o n CP300/CP300i
GPS Chart Plotters
Page 51