Timer Recording - Panasonic DMR-E20 Operating Instructions Manual

TV
VOL
TV/AV
OPEN/CLOSE
3 4
PROG / CHECK ENTER RETURN
5
TOP WINDOW STATUS
FRAME
TV ASPECT TV/TEXT
SKIP SLOW/SEARCH
STOP PAUSE PLAY
1 2 3
4 5 6
7 8 9
SV/V+
1
0 /
REC REC MODE
CANCEL
MANUAL INPUT
TIME SLIP
SKIP SELECT
DIRECT
LAST
TV REC
AV LINK AUDIO
MARKER
TIMER
DVD TV
SETUP
REC
Á
Using Video Plus+ Codes to make timer recording (For the United Kingdom)
[RAM] [DVD-R]
Remote control only
You can easily programme the unit to make a timer recording of a programme by entering the
programme's Video Plus+ Codes, which can be found in the television sections of newspapers or
in television guides. You can programme up to 16 programmes one month in advance.
Programmes for everyday or every week are counted as one programme.
Preparation
≥Switch [DVD, TV] to "DVD".
≥Ensure that this units clock is set correctly.
5
≥Insert a disc for recording (make sure there is enough room for the programme you are going to
record plus a little extra).
1
Press [SV/V+].
2
2
Press the numeric buttons to enter the code.
≥If you enter the wrong digit, use the joystick [2] to move back and enter the correct digit.
3
Press [ENTER].
≥The Timer Programme Correction screen which allows you to confirm the programme
appears and make corrections if necessary.
≥Check the programme.
To make corrections (page 33).
To programme other recordings, repeat steps 1, 2, and 3.
4
If the programme is correct
Press [ENTER].
≥The Timer Programme List screen appears.
5
Press [PROG/CHECK] or [RETURN].

Timer recording

32