Panasonic DMR-E20 Operating Instructions Manual page 54

TV
VOL
TV/AV
OPEN/CLOSE
7·8·
ENTER
PROG / CHECK RETURN
9
TOP WINDOW STATUS
FRAME
TV ASPECT TV/TEXT
SKIP SLOW/SEARCH
STOP PAUSE PLAY
1 2 3
4 5 6
7 8 9
SV/V+
/
0
REC REC MODE CANCEL
MANUAL INPUT
TIME SLIP
SKIP SELECT
DIRECT
LAST
TV REC AV LINK AUDIO
MARKER
TIMER
DVD TV
SETUP
REC
Á
7
Use search functions such as fast-forward and slow-motion to find the end
point of the part you want to erase and press [ENTER].
Use the joystick [3, 4] to select "Exit" and press [ENTER].
8
9
Use the joystick [2] to select "Erase" and press [ENTER].
≥Play lists created with the erased part are also erased.
ªTo stop partway through
Select "Cancel" in step 9 and press [ENTER].
Or
Press [RETURN].
ªTo erase another part of the same programme
Select "Next" in step 8, then repeat steps 6, 7 and 9.
For your reference
≥You can respecify the start or end points. The points you specify last are used.
≥You cannot specify an end point before a start point or a start point after an end point.
≥You may not be able to specify start and end points within 3 seconds of each other.
≥You cannot specify start and end points if the picture recorded is stilled.
≥The unit pauses play when the end of the programme is reached during this procedure.
≥The disc's available recording time may not increase after erasing short parts of programmes.
≥You cannot erase parts of protected programmes.
≥Play lists created with the erased part are also erased.
54
Using the direct navigator (continued)