Panasonic DMR-E20 Operating Instructions Manual page 33

TV
VOL
TV/AV
OPEN/CLOSE
PROG / CHECK ENTER RETURN
TOP WINDOW STATUS
FRAME
TV ASPECT TV/TEXT
SKIP SLOW/SEARCH
STOP PAUSE PLAY
1 2 3
4 5 6
7 8 9
SV/V+
/
0
REC REC MODE CANCEL
MANUAL INPUT
TIME SLIP
SKIP SELECT
DIRECT
LAST
TV REC
AV LINK AUDIO
MARKER
TIMER
DVD TV
SETUP
REC
Á
ªTo put the unit on recording standby
Press [Á, TIMER REC].
Ensure "Á" lights on the unit's display.
ªFlexible recording mode (FR)
≥The unit automatically selects a recording mode between "XP" and "EP" that will enable the
timer recording to fit in the available recording time on the disc with the best possible recording
quality.
≥This only works with timer recording.
≥It may not be possible to record to the finish of the programme if the remaining time doesn't
allow.
≥This does not work with PDC.
Note
≥The built-in clock employs 24-hour system.
≥The actual time recorded may be longer than the programme itself when television
programmes are recorded using Video Plus+ Function.
≥"Invalid Entry" is displayed when you enter the wrong code. Reenter the code.
≥ "FULL" is displayed in there are already 16 items programmed. Delete unnecessary items
(page 48).
≥The remaining time displayed is calculated based on the current recording mode.
≥Approximetely 30 seconds at the beginning of subsequent programmes is not recorded when
use timer recording to record multiple programmes to a DVD-R.
≥Recording is not possible unless you set "Disc Protection" in "DISC INFORMATION" to "Off".
≥You can not record to a disc if the write protect tab on a cartridge disc is set to protect. Release
this before operation (page 90).
≥If the unit is not put in the timer recording standby mode at the latest 10 minutes before the
programmed timer recording starting time, the [Á] flashes on the unit display. In this case,
press the [Á, TIMER REC] button to put the unit in the timer recording standby mode.
ªTo change the programme
Timer Programme Correction screen (from step 3 on page 32)
1) Use the joystick [2, 1] to select the item you want to change.
2) Change the setting with the joystick [3, 4].
The items change as follows:
≥Pos/Name (Programme Position/TV Station Name)
≥Date
Current date>the day before one month later>Daily (Sunday to Saturday)>
Daily (Monday to Saturday)>Daily (Monday to Friday)>Weekly (Sundays)>
Weekly (Saturdays)
≥Start ON (start time)/Stop OFF (finish time)
The time increases or decreases in 30-minute increments if you hold the button.
≥REC MODE (Recording mode)
XP>SP>LP>EP>FR (page 26)
≥PDC
ON>OFF (jjj) (page 34)
3) Press [ENTER] when you have finished making changes.
The programme that the television is tuned to is shown.
33
Timer recording (continued)