Timer Recording - Panasonic DMR-E30 Operating Instructions Manual

Using VIDEO Plus+* (G-
make timer recording
* VIDEO Plus+ : for the United Kingdom.
G- : for Hong Kong Special Administrative Region of China.
CODE
G- and VIDEO Plus+ are different trademarks used to
CODE
represent the same easy recording feature. However, for
simplicity, only the term VIDEO Plus+ will be used. If you use
G- system, follow the same steps listed for the VIDEO
CODE
Plus+ system.
[RAM] [DVD-R]
Remote control only
You can easily programme the unit to make a timer recording of a
programme by entering the programme's VIDEO Plus+ (G-
number, which can be found in the television sections of
newspapers or in television guides. You can programme up to 16
programmes one month in advance. Programmes for everyday or
every week are counted as one programme.
Preparation
≥ Switch [DVD, TV] (15) to "DVD".
≥ Ensure that this unit's clock is set correctly.
≥ Insert a disc for recording (make sure there is enough room for
the programme you are going to record plus a little extra).
1
Press [VIDEO Plus+] ([G-
<VIDEO Plus+>
VIDEO Plus+
Remain 0:59 SP
12:53:00 16.7 TUE
Enter VIDEO Plus+ Number by using 0-9 key.
No.
0 -- 9
RETURN
2 Press the numeric buttons (4) to enter the VIDEO
Plus+ (G- ) number.
CODE
VIDEO Plus+
Remain 0:59 SP
12:53:00 16.7 TUE
1 1 1 1 1 1 1 1 1
No.
0 -- 9
RETURN
≥ If you enter the wrong digit, use [ 2 ] (10) to move back and
enter the correct digit.
Press [ENTER] (10).
3
≥ The Timer Programme Correction screen which allows you to
confirm the programme appears and make corrections if
necessary.
TIMER
Remain 1:58 SP
RECORDING
12:53:00 16.7 TUE
Name Date Start Stop Mode PDC
BBC 1 16/ 7 TUE 1:00 2:00 SP OFF
Press ENTER to store new programme.
SELECT
CANCEL
ENTER
RETURN
≥ Check the programme.
To make corrections (page 32).
To programme other recordings, repeat steps 1, 2, and 3.

Timer recording

) number to
CODE
)
CODE
]) (2) button.
CODE
<G- >
CODE
G-CODE
Remain 0:59 SP
12:53:00 16.7 TUE
Enter G-CODE Number by using 0-9 key.
No.
0 -- 9
RETURN
G-CODE
Remain 0:59 SP
12:53:00 16.7 TUE
1 1 1 1 1 1 1 1 1
No.
0 -- 9
RETURN
TIMER
Remain 1:58 SP
RECORDING
12:53:00 16.7 TUE
Name Date Start Stop Mode PDC
BBC 1 3/ 26 TUE 1:00 2:00 SP OFF
Press ENTER to store new programme.
SELECT
CANCEL
ENTER
RETURN
4
If the programme is correct
Press [ENTER] (10).
≥ The Timer Programme List screen appears.
TIMER
RECORDING
No. Name Date Start Stop
01 BBC 1 16/ 7 TUE 1:19 1:22
New Timer Programme
SELECT
CANCEL
ENTER
RETURN
Press [RETURN] (23).
5
ª To put the unit on recording standby
Press [ Á , TIMER] (12).
Ensure " Á " lights on the unit's display.
31
Remain 1:58 SP
1:19:00 16.7 TUE
Disc
Mode PDC
space
SP OFF OK