Video Plus+ Codes For Satellite Receivers/Cable Tv - Panasonic DMR-E20 Operating Instructions Manual

TV
VOL
TV/AV
OPEN/CLOSE
3·4·
5·6·
ENTER
PROG / CHECK RETURN
7
STATUS
TOP WINDOW
FRAME
TV ASPECT TV/TEXT
SKIP SLOW/SEARCH
STOP PAUSE PLAY
1 2 3
4 5 6
7 8 9
SV/V+
2
/
0
REC REC MODE CANCEL
MANUAL INPUT
TIME SLIP
SKIP SELECT
DIRECT
LAST
TV REC AV LINK AUDIO
MARKER
TIMER
DVD TV SETUP
REC
Á

Video Plus+ Codes for Satellite Receivers/Cable TV

For the United Kingdom:
This unit is not designed to control (switch on or change channel) your satellite receiver or Cable
TV box, however, it can be taught to recognise Video Plus+ Codes for Satellite stations. The
Satellite receiver or Cable TV box must be switched on and the correct station selected. Some
receivers have their own timer facility for this purpose. Please refer to your Satellite Receiver/
Cable TV box instructions for use of such timer facilities.
For your unit to recognise the Video Plus+ Codes for each satellite station, you must teach your
unit which channel or AV input to record from for the first time. Otherwise when setting a Video
Plus+ recording, the [ss] symbol will appear in the channel position indicating that the unit does
9
not know which channel position to set. Once you have set the channel/AV input once the unit
will remember it whenever you use a Video Plus+ Code for the station again.
Preparation
≥Turn on the television.
≥Switch [DVD, TV] to "TV".
1
Turn on the TV and the unit. Select video playback channel on the TV.
2
Press the SV/V+ button.
3
3
Enter a Video Plus+ Code from a Satellite TV Guide
for a satellite channel, e.g. Sky 1 using the Numeric
buttons. If you make a mistake, use the joystick [2 2 2 2 ]
to go back.
7
4
Press [ENTER]. [ss
channel number/AV input.
5
Use the joystick [
or AV input that is to be used for recording from the
satellite channel.
6
Press [ENTER] to memorise the setting. The unit
will now automatically set the programme position
or AV input correctly when a Video Plus+ recording
is set for this satellite station in the future.
Use the joystick [3 3 3 3 ] to select the programme that
7
you have just set. Now press [CANCEL] to delete it
from the timer recording list. It is no longer needed.
Repeat steps 2s s s s 7 above until you have set and
8
deleted dummy timer recordings for each of the satellite stations that you
will make Video Plus+ recordings from.
9
Press [RETURN] when you have finished.
ss] will appear instead of a
ss ss
3, 4, 2, 1
] to select the channel
15