Panasonic DMR-E20 Operating Instructions Manual page 92

Play
Play fails to start even when
[1, PLAY] is pressed.
Play starts but then stops
immediately.
"U11", "NO DISC", or "Cannot
Play" appears on the unit's
display.
No response when buttons
pressed.
A title or chapter doesn't play
when it is selected.
Picture distorted during search.
There is ghosting.
Alternative soundtrack and
subtitles cannot be selected.
Soundtrack/subtitle language not
the one selected with the SET UP
menus.
No subtitles.
Angle cannot be changed.
You have forgotten your ratings
password.
Remote control
The remote control doesn't work.
Cannot operate the television.
≥Insert the disc correctly with the label facing up. (page 17)
≥This unit cannot play discs other than DVD-RAM, DVD-R, DVD-Video, Video CD, and CD.
(page 8)
≥The disc is dirty. Clean it. (page 87)
≥The disc may be badly scratched. (page 87)
≥You inserted a blank DVD-RAM or DVD-R.
≥Some operations may be prohibited by the disc.
≥If the unit is not operating at all, press [Á, TIMER REC] to switch the unit to standby, then press
[Á, TIMER REC] again to turn the unit on. The unit may not be operating correctly due to
lightning, static electricity, or some other external factor.
≥The Child Lock function is activated. (page 70)
≥Some titles and chapters on DVD-Video are not played when you have changed the ratings
level. (page 78)
≥Some distortion is normal.
≥Change the settings for "3D-NR", "Block NR", and "Mosquito NR" to "0", or turn "MPEG-DNR"-off
with the on-screen menu icons. (page 66)
≥The languages are not recorded on the disc.
≥You may have to use the disc's menus to select languages.
≥The language is not recorded on the disc. (page 75)
≥Subtitles are not recorded on the disc.
≥Turn the subtitles on. (page 65)
≥This function depends on software availability. Angles can only be changed during scenes where
different angles are recorded ("
≥Restore the ratings setting to the factory settings.
While the disc tray is open, press and hold [:] and [9] at the same time for 5 or more
seconds.
≥The unit is on standby to make a timer recording ("Á" on the unit's display is on). (page 32)
≥[DVD, TV] is not switched to "DVD".
Switch to "DVD" when operating this unit. (page 6)
≥The remote control code is wrong.
Change to the correct code. (page 80)
≥The batteries are depleted. Replace them with new ones. (page 6)
≥Point the remote control at the remote control sensor on the main unit. (page 6)
≥Remove obstacles from between the remote control and main unit.
≥The remote control code is wrong.
Change to the correct code. Some televisions cannot be operated even if you change the code.
(page 10)
≥[DVD/TV] is not switched to "TV".
Switch to "TV" when operating the television. (page 6)
92
Troubleshooting guide (continued)
" appears on the display).