Panasonic DMR-E20 Operating Instructions Manual page 84

TV
VOL
TV/AV
OPEN/CLOSE
ENTER
PROG / CHECK RETURN
STATUS
TOP WINDOW
FRAME
TV ASPECT TV/TEXT
SKIP SLOW/SEARCH
STOP PAUSE PLAY
1 2 3
4 5 6
7 8 9
SV/V+
/
0
REC REC MODE CANCEL
MANUAL INPUT
TIME SLIP
SKIP SELECT
5 DIRECT
LAST
TV REC AV LINK AUDIO
MARKER
TIMER
DVD TV
SETUP
REC
Á
4
5
Adding, deleting, and moving channels
Use this function if:
≥Channels were not set correctly using automatic tuning.
≥A channel that should have been set wasn't.
≥A channel's reception is poor and you want to delete it.
Preparation
2·3·
Switch [DVD, TV] to "DVD".
4·5
1
Press [SET UP].
≥The SET UP screen appears.
6
Use the joystick [2, 1] to select "Settings" tab.
2
Use the joystick [3, 4] to select "Tuning" and press [ENTER].
3
4 Use the joystick [3, 4] to select "Manual" and press [ENTER].
Use the joystick [3, 4, 2, 1] to select the desired TV station and use the
5
colour buttons to select "Delete", "Add", "Move".
Follow the operations below.
To delete a programme position "Delete":
Press the [TIME SLIP] (red).
To insert a blank programme position "Add":
Press the [MANUAL SKIP] (green).
To move a TV station to another programme position "Move":
Press the [INPUT SELECT] (yellow), and then use the joystick [3, 4] to select the new
programme position to which you want to assign the TV station.
1
6
Press [RETURN].
Note:
≥Setting can take up to 3 minutes approximately.
≥If downloading of the setup data has been performed, only the instruction indication "Delete"
appears.
Hint:
≥If you have performed Manual Tuning to enter TV stations, the [jj] indication may appear
under [Pos/Name] on the On Screen Display when programming a Video Plus+ timer
recording.
Changing the unit's settings (continued)
84