Alarm Active Mode (Manual Recording); Timer Recording Setup; Program Timer - Panasonic WJ-HD500A Operating Instructions Manual

Alarm Active Mode (Manual
Recording)
This item lets you select the active mode when an alarm is
received during manual recording.
1. Move the cursor to TRIGGER ACTION SETUP in the
MANUAL REC SETUP menu by pressing the D or C
button, then press the SET button.
The TRIGGER ACTION SETUP menu as shown below
appears on the monitor screen.
2-1 TRIGGER ACTION SETUP
CAM ACTION
1 REC+ALM
2 REC
3 OFF
4 REC+ALM
5 REC+ALM
6 REC+ALM
7 REC+ALM
8 REC+ALM
2. Move the cursor to the active mode editing area for the
camera by pressing the A, B,C or D button.
3. Select the desired active mode by pressing the + or
- button.
REC+ALM: Enables alarm recording and alarm activa-
tion.
REC: Enables only alarm recording.
The ALARM display on the monitor is disabled.
OFF: Deactivates alarm input.
The ALARM display on the monitor is also disabled.
The factory default setting is REC+ALM.
4. Repeat the above steps 2 and 3 to select the active
mode for other cameras.
5. When all camera modes are completed, press the
SETUP/ESC button to return to the previous MANUAL
REC SETUP menu.
6. To return to the WJ-HD500 SETUP, press the SETUP/
ESC button.
50
CAM ACTION
9 REC+ALM
10 REC+ALM
11 REC+ALM
12 REC+ALM
13 REC+ALM
14 REC+ALM
15 REC+ALM
16 REC+ALM

Timer Recording Setup

The Disk Recorder can record the images triggered by the
internal timer.
The internal timer comprises four event times common to
the recording groups, and is programmed in the setup.
1. Move the cursor to TIMER in the WJ-HD500 SETUP
menu by pressing the D or C button.
2. Select either audio recording display by pressing the
+ or - button, then press the SET button.
The TIMER REC SETUP menu according to the speci-
fied audio function will appear on the monitor screen.
3 TIMER REC SETUP(WITHOUT AUDIO)
PROGRAM
SUNDAY ---
MONDAY ---
TUESDAY ---
WEDNESDAY ---
THURSDAY ---
FRIDAY ---
SATURDAY ---
DAILY PROG1
TIMER SPECIAL DAY
EXT REC MODE ---

Program Timer

These items let you set the program timer for each day of
the week.
1. Move the cursor to the program editing area for each
day in the TIMER REC SETUP menu by pressing the D
or C button.
2. Select a program timer (PROG1 to PROG4) to be
assigned for the day.
It is recommended to assign a program to a weekday, a
weekend or on a daily basis.
Selecting (---) will disable the program timer.
3. Repeat the above step to assign the program timer for
other days.
4. Move the cursor to the assigned program number
(PROG1), then press the SET button.
The assigned program number menu as shown below
appears on the monitor screen.
3-1 PROG1(WITHOUT AUDIO)
NO START END G1
1 0:00 6:00 T/L
RATE 7.5
2 6:00 12:00 M/S
RATE 10
3 12:00 18:00 M/S
RATE 5
4 18:00 24:00 O/S
RATE 15
SET TOTAL REC RATE ON EACH TABLE
G1+G2+G3+G4= UNDER 60FPS
REC-CAMERA SETUP (SET) ON NO1-4
G2 G3 G4
T/L T/L T/L
7.5 1 10
- O/S O/S
5 1
M/S M/S M/S
2 2 5
M/S - M/S
10 10