Selecting Tv Screen Type - Panasonic DMR-E20 Operating Instructions Manual

TV
VOL
TV/AV
OPEN/CLOSE
1
ENTER
PROG / CHECK RETURN
TOP WINDOW STATUS
FRAME
TV ASPECT TV/TEXT
SKIP SLOW/SEARCH
STOP PAUSE PLAY
1 2 3
4 5 6
7 8 9
SV/V+
/
0
REC REC MODE CANCEL
MANUAL INPUT
TIME SLIP
SKIP SELECT
DIRECT
LAST
TV REC AV LINK AUDIO
MARKER
TIMER
DVD TV
SETUP
REC
Á
The aspect ratio is factory set to 4:3 for a regular television. You do not have to change this
setting if you have a regular 4:3 aspect television.
Preparation
≥Turn on the television and select the appropriate video input to suit the connections to this unit.
≥Switch [DVD, TV] to "DVD".
Press [Í Í Í Í ] to turn this unit on.
1
2
Press [SET UP] to show the menus.
3·4·
5
Use the joystick [2, 1] to select the "Connection" tab.
3
Use the joystick [3, 4] to select "TV Aspect" and press [ENTER].
4
Use the joystick [3, 4] to select the TV aspect and press [ENTER].
5
2
≥4:3 (factory setting)
≥16:9
ªTo return to the previous screen
Press [RETURN].
For your reference
Apart from "TV Aspect", other settings also affect how video appears on your television. Check
the following if video doesn't appear correctly on your television.
≥"Connection" — "4:3 TV Settings for DVD-RAM" or "4:3 TV Settings for DVD-Video" (page 77).
≥The video setting on the disc. How video appears is often specified by the disc itself.
≥The video settings on your television.

Selecting TV screen type

16