Recording From A Video Cassette Player - Panasonic DMR-E20 Operating Instructions Manual

TV
VOL
TV/AV
OPEN/CLOSE
ENTER
PROG / CHECK RETURN
TOP WINDOW STATUS
FRAME
TV ASPECT TV/TEXT
SKIP SLOW/SEARCH
STOP PAUSE PLAY
1 2 3
4 5 6
7 8 9
SV/V+
/
0
REC REC MODE CANCEL
3
MANUAL INPUT
TIME SLIP
SKIP SELECT
DIRECT
LAST
TV REC AV LINK AUDIO
MARKER
TIMER
DVD TV SETUP
REC
Á
1
When you have selected "AV3"
3

Recording from a video cassette player

When connected to non-DV equipment
[RAM] [DVD-R]
You can record audio and video being played on a video cassette player or video camera
connected to the input terminals.
Preparation
≥Before connecting any cables, first make sure that the power for both units is off.
Then after connecting any cable, turn on the both units.
≥Connect the other equipment to this unit's input terminals (page 73).
≥Switch [DVD, TV] to "DVD".
≥Insert a disc that can be recorded on.
≥Select the recording mode, XP, SP, LP, or EP (page 26).
1
While stopped
Press [W, X] or [INPUT SELECT] to select the input channel for the
equipment you have connected.
≥Select AV1, AV2, AV3 or AV4.
2
Start play on the other equipment.
3
Press [¥, REC] at the point you want to start recording.
1
When connected to DV equipment
[RAM] [DVD-R]
1
You can record audio and video being played on a DV equipment connected to the input
terminals.
Preparation
≥Before connecting any cables, first make sure that the power for both units is off.
Then after connecting any cable, turn on the both units.
≥Connect the other equipment to this unit's input terminals (page 69).
≥Use a DV cable to connect the equipment.
≥Switch [DVD, TV] to "DVD".
≥Insert a disc that can be recorded on.
≥Select the recording mode, XP, SP, LP, or EP (page 26).
1
While stopped
Press [W, X] or [INPUT SELECT] to select the input channel for the
equipment you have connected.
≥Select DV.
2
Start play on the other equipment.
3
Press [¥, REC] at the point you want to start recording.
For your reference
We recommend connecting one piece of DV equipment at a time.
38