Timer Recording; Using Video Plus+ Number To Make Timer Recording - Panasonic DMR-E60 Operating Instructions Manual

Using VIDEO Plus+ number to make

timer recording

VIDEO Plus+ are different trademarks used to represent the
same easy recording feature. However, for simplicity, only the
term VIDEO Plus+ will be used.
[RAM] [DVD-R]
Remote control only
You can easily programme the unit to make a timer recording of a
programme by entering the programme's VIDEO Plus+ number,
which can be found in the television sections of newspapers or in
television guides. You can programme up to 16 programmes one
month in advance. Programmes for everyday or every week are
counted as one programme.
Preparation
≥Switch [DVD, TV] (19) to "DVD".
≥Ensure that this unit's clock is set correctly.
≥Insert a disc for recording (make sure there is enough room for
the programme you are going to record plus a little extra).
Press [VIDEO Plus+] (2) button.
1
VIDEO Plus+
Remain 0:59 SP
12:53:00 15.7 TUE
Enter VIDEO Plus+ Number by using 0-9 keys.
No.
0 -- 9
RETURN
Press the numeric buttons (4) to enter the VIDEO
2
Plus+ number.
VIDEO Plus+
Remain
12:53:00 15.7 TUE
1 1 1 1 1 1 1 1 1
No.
0 -- 9
RETURN
≥If you enter the wrong digit, use [2] (10) to move back and
enter the correct digit.
Press [ENTER] (10).
3
≥The Timer Programme Correction screen which allows you to
confirm the programme appears and make corrections if
necessary.
TIMER
Remain 1:58 SP
RECORDING
12:53:00 15.7 TUE
Name Date Start Stop Mode PDC
BBC 1 15/ 7 TUE 1:00 2:00 SP OFF
Title
Press ENTER to store new programme.
SELECT
No.
CANCEL
--
0 9
ENTER RETURN
≥Check the programme.
To programme other recordings, repeat steps 1, 2, and 3.
Timer recording
0:59 SP
4
If the programme is correct
Press [ENTER] (10).
≥The Timer Programme List screen appears.
TIMER
RECORDING
No. Name Date Start Stop
01 BBC 1 15/ 7 TUE 1:19 1:22
New Timer Programme
SELECT
CANCEL
ENTER RETURN
5 Press [RETURN] (28).
ªTo put the unit on recording standby
, TIMER] (14).
Press [
Ensure " " lights on the unit's display.
ªTo change the programme
TIMER
Remain
RECORDING
1:19:00 15.7 TUE
Name Date Start Stop Mode
BBC 1 15/ 7 TUE 1:00 2:00 SP
Press ENTER to store new programme.
SELECT
No.
CANCEL
0 -- 9
ENTER RETURN
Timer Programme Correction screen (After step 3 at left)
1) Use [2, 1] (10) to select the item you want to change.
2) Change the setting with [3, 4] (10).
≥You may use the numeric buttons (4) to enter "Name",
"Date", "Start" and "Stop".
The items change as follows:
≥Name (Programme Position/TV Station Name)
≥Date
Current date!)the day before one month later!)
Daily (Sunday to Saturday)!)Daily (Monday to
Saturday)!)Daily (Monday to Friday)!)Weekly
(Sundays)!)...!)Weekly (Saturdays)!)Current date...
≥Start (start time)/Stop (finish time)
The time increases or decreases in 30-minute increments if
you hold the button.
≥Mode (Recording mode)
XP!)FR!)EP!)LP!)SP!)XP... (page 26)
≥PDC
ON!)OFF(– – –)
"– – –": The PDC signals cannot be detected in Auto Setup,
because the station does not transmit the PDC
signals.
"OFF": The station's PDC signals is detected in Auto Setup.
≥If "– – –" indicated, the station may not temporarily transmit
the PDC signals. It is recommended to attempt to carry out
Auto Setup again (in several hours, in several days, etc.).
(page 68)
If "– – –" still appears after several attempts, the station
possibly does not transmit the PDC signals.
If you obtain different results, the PDC signals is probably
unstable. It is recommended to programme in a state of
"– – –" or "OFF".
≥Title
Select "Title" and press [ENTER] (10), then refer to page 36
for entering title.
You can give DVD-RAM and DVD-R titles of up to 44
characters.
3) Press [ENTER] (10) when you have finished making changes.
The Timer Programme List screen appears.
32
Remain 1:58 SP
1:19:00 15.7 TUE
Disc
PDC
Mode
space
SP OFF OK
1:58 SP
PDC
OFF
Title