Creating Play Lists - Panasonic DMR-E20 Operating Instructions Manual

TV
VOL
TV/AV
OPEN/CLOSE
ENTER
PROG / CHECK RETURN
TOP WINDOW STATUS
1
FRAME
TV ASPECT TV/TEXT
SKIP SLOW/SEARCH
STOP PAUSE PLAY
1 2 3
4 5 6
7 8 9
SV/V+
/
0
REC REC MODE CANCEL
MANUAL INPUT
TIME SLIP
SKIP SELECT
DIRECT
LAST
TV REC AV LINK AUDIO
MARKER
TIMER
DVD TV
SETUP
REC
Á

Creating play lists

[RAM]
You can specify start and end points to create a scene, then specify the order in which these
scenes are played. These scenes are not recorded separately so this doesn't use up much of the
disc's capacity.
Preparation
≥Switch [DVD, TV] to "DVD".
2·3·
≥Insert a disc you have recorded on.
4·5
1
While stopped
Press [TOP WINDOW].
Use the joystick [3, 4, 2, 1] to select "CREATE PLAY LIST" and press
2
[ENTER].
3
Use search functions such as fast-forward and
slow-motion to find the start point of the scene and
press [ENTER].
4
Use search functions such as fast-forward and
slow-motion to find the end point of the scene and
press [ENTER].
Use the joystick [3, 4] to select "Exit" and press
5
[ENTER].
ªTo stop partway through
Press [RETURN].
ªTo clear the play list screen
Press [MENU, PLAY LIST] or [RETURN].
The screen returns to the state it was in before you called up the play list.
ªTo specify another scene
Select "Next" after step 4 and press [ENTER], then repeat steps 3 and 4.
For your reference
≥One disc can have a maximum of 99 play lists and 999 scenes. These numbers may be
reduced under some conditions.
≥You can respecify the start or end points. The points you specify last are used.
≥You cannot specify an end point before a start point or a start point after an end point.
≥If you specify an end point but not a start point, the unit determines the beginning of the
programme as the start point. Similarly, if you specify a start point but not an end point, the unit
determines the end of the programme as the end point.
≥You may not be able to specify start and end points if the material is still pictures recorded on
other equipment.
≥The unit pauses play when the end of the last programme on the disc is reached during this
procedure.
≥You cannot create or edit play lists if "Disc Protection" in "DISC INFORMATION" is "On"
(page 42).
≥You cannot create or edit play lists if the write protect tab on a cartridge disc is set to protect.
Release this before operation (page 90).
≥You can also display the CREATE PLAY LIST screen by selecting
"jj" at the bottom of the play list.
Using play lists to edit programmes (continued)
56