Child Lock; To Activate The Child Lock; To Cancel The Child Lock; Upgrading Your System - Panasonic DMR-E20 Operating Instructions Manual

The child lock deactivates all buttons on the unit and remote control. Use it to prevent other people from operating
TV
VOL the unit.
TV/AV

To activate the child lock

OPEN/CLOSE
Hold down [RETURN] and [CANCEL] simultaneously until "X HOLD" appears on the unit's display.
≥If you press a button while the child lock is on, "X HOLD" appears on the unit's display and operation is impossible.

To cancel the child lock

Hold down [RETURN] and [CANCEL] simultaneously until "X HOLD" disappears.
PROG / CHECK ENTER RETURN
≥If you cannot cancel the Child Lock, press [RETURN] and then perform the operation.
TOP WINDOW STATUS
FRAME
TV ASPECT TV/TEXT
SKIP SLOW/SEARCH
STOP PAUSE PLAY
1 2 3
4 5 6
7 8 9
SV/V+
/
0
REC REC MODE CANCEL
MANUAL INPUT
TIME LIP

Enjoying more powerful sound

Refer to the relevant pages for details.
Enjoying 5.1-channel
surround sound with Dolby
Digital and DTS
To enjoy stereo or Dolby Pro
Logic
ªOther uses
Record to digital recording equipment or cassette deck ([A] [B] page 71)
Record from an video cassette recorder ([E] page 73)
Use connection [B] to enjoy discs recorded with a sampling frequency of 96 kHz. Sound will not be output if you use connection [A] dand set
"PCM Down Conversion" to "No" due to copy protection. (Convert the signal to 48 kHz to enjoy this type of audio.)
For your reference
≥The equipment connections described are examples.
≥Before connection, turn off all equipment and read the appropriate operating instructions.
Note
You can enjoy Dolby Digital in stereo with this unit alone.
(This unit does not have a DTS decoder.)

Child Lock

Upgrading your system

Digital connection
Connect to an amplifier with
built-in decoders.
Analogue connection
Connect to an analogue
amplifier or system component.
Digital connection
Connect to a digital amplifier or
system component.
70
71 SET UP— Sound
[A] ≥Set "PCM Down Conversion"
to "Yes".
≥Set "Dolby Digital" and "DTS"
to suit the equipment..
Change speaker settings on the
amplifier.
71 SET UP— Sound
≥Set "PCM Down Conversion"
[B]
to "No".
71 SET UP— Sound
[A] ≥Set "PCM Down Conversion"
to "Yes".
≥Set "Dolby Digital" to "PCM".
≥Set "DTS" to "Off".
78
—
78
78