Marking Places To Play Again-Marker - Panasonic DMR-E20 Operating Instructions Manual

TV
VOL
TV/AV
OPEN/CLOSE
ENTER
PROG / CHECK RETURN
STATUS
TOP WINDOW
FRAME
TV ASPECT TV/TEXT
SKIP SLOW/SEARCH
STOP PAUSE PLAY
1 2 3
4 5 6
7 8 9
SV/V+
/
0
REC REC MODE
CANCEL
MANUAL INPUT
TIME SLIP
SKIP SELECT
DIRECT
LAST
TV REC
AV LINK MARKER AUDIO
TIMER
DVD TV
SETUP
REC
Á
Marking places to play again — MARKER
[RAM] [DVD-R] [DVD-V] [CD] [VCD]
Preparation
≥Switch [DVD, TV] to "DVD".
≥Turn off the surround effects on the other equipment.
≥Press [DISPLAY] )[DISPLAY] to display the on-screen menu icons and use the joystick [1] to
highlight the marker icon (pages 64 and 66).
1·2·
Marking Place
3·4
[RAM] [DVD-R]
You can mark up to 999 points on a disc to return to later. These marks are recorded directly
onto DVD-RAM, but are cleared when you removed or finalized DVD-R.
[DVD-V] [CD] [VCD]
You can mark up to 5 points on a disc to return to later. All the markers are cleared when the disc
tray is opened.
1
Press [ENTER].
Use the joystick [2, 1] to select the next asterisk (¢).
2
3
Press [ENTER] at the point you want to mark.
To play from a marked position
Preparation
≥Switch [DVD, TV] to "DVD".
≥Press [DISPLAY] )[DISPLAY] to display the on-screen menu icons and use the joystick [1] to
highlight the marker icon (pages 64 and 66)
1
Press [ENTER].
Use the joystick [2, 1] to select a marker number.
2
3
Press [ENTER].
[RAM] [DVD-R]
When selecting markers 11 and above
Use the joystick [2, 1] to highlight the marker pin icon.
1
Use the joystick [3, 4] to select "11 – 20".
2
≥The group of 10 increases each time you move the joystick [3].
3
Use the joystick [1] and press [ENTER].
Use the joystick [2, 1] to select a marker number.
4
ªTo clear a marker
Use the joystick [2, 1] to select a marker number and press [CANCEL].
ªTo clear the on-screen icons
Press [RETURN].
Note
[RAM]
≥This feature doesn't work while using a play list.
≥The markers are ordered by time. This means that the marker numbers can change when you
add and erase markers.
≥You cannot mark and clear points if you have write-protected the disc, either with the write
protect tab (page 90) or with DISC INFORMATION (page 42).
[DVD-R]
≥The markers are ordered by time. This means that the marker numbers can change when you
add and erase markers.
[DVD-V] [CD] [VCD]
≥This feature only works if the elapsed playing time of the disc is shown on the unit's display.
≥Some subtitles recorded around the marker may fail to appear.
Using on-screen menu icons (continued)
68