Connections (With S-Video Cable) - Panasonic DMR-E20 Operating Instructions Manual

Connections and preparations for a TV with S-Video socket.
The conventional video sockets of DVD Recorder's output (input) a combination of the luminance signal (Y) and colour signal (C) which are
recorded on the disc. The S (Separate)-Video socket allows separate transmission of signals in order to obtain clearer pictures.
The connection with S-Video Cable can also be used for playback of any disc. The "S" in the "S-Video socket" stands for "SEPARATED Y/C"
not for "S-VHS".
S-Video Output socket
AC Input
socket
AC Mains lead (supplied)
After completing the above connections, proceed to the Auto Setup page (Page 14).
Note:
The pictures output by this DVD Recorder can only be viewed when connected to a TV by either the Scart lead or S-Video socket method.

Connections (with S-Video cable)

RF Input socket
RF Output
Audio/Video
socket
Output socket
S-Video cable
(not supplied)
12
Audio/video
Input socket
Aerial
(not supplied)
Aerial Input
socket
RF lead
(supplied)
S-Video Input
Audio/Video cables
socket
(supplied)
TV with S-Video
Input socket
(not supplied)
To AC Mains
socket