Table of Contents
Advertisement
INSTRUCTION SET
LDCPD/LDEPD
LDCPD/
LDEPD
dst,src
rr ← rr – 1
Operation:
dst ← src
These instructions are used for block transfers of data from program or data memory from the
register file. The address of the memory location is specified by a working register pair and is first
decremented. The contents of the source location are then loaded into the destination location.
The contents of the source are unaffected.
LDCPD refers to program memory and LDEPD refers to external data memory. The assembler
makes 'Irr' an even number for program memory and an odd number for external data memory.
Flags:
No flags are affected.
Format:
opc
Examples:
Given: R0 = 77H, R6 = 30H, and R7 = 00H:
LDCPD
LDEPD
6-56
— Load Memory with Pre-Decrement
src | dst
; (RR6 ← RR6 – 1)
@RR6,R0
; 77H (contents of R0) is loaded into program memory location
; 2FFFH (3000H – 1H)
; R0 = 77H, R6 = 2FH, R7 = 0FFH
; (RR6 ← RR6 – 1)
@RR6,R0
; 77H (contents of R0) is loaded into external data memory
; location 2FFFH (3000H – 1H)
; R0 = 77H, R6 = 2FH, R7 = 0FFH
S3C8275X/F8275X/C8278X/F8278X/C8274X/F8274X
Bytes
Cycles
Opcode
2
14
Addr Mode
(Hex)
dst
src
F2
Irr
r
Advertisement
Table of Contents
