August, 2006
3.2.5 RIGHT COVERS
Remove:
Disconnect and separate the LCT if it is installed.
[A]: LCT installation cover (
been installed.
[B]: Open the bypass tray.
[C]: Right upper cover (
as you remove it.
[D]: Right lower cover (
you remove it.
Reinstallation
Make sure all the cover tabs are inserted correctly before you fasten the screws.
x2). This has been removed already if the LCT has
x2). Pull the bottom of the cover down and toward you
x5). Pull the bottom of the cover down and toward you as
3-9
COMMON REMOVAL PROCEDURES
[C]
[B]
B132R704.WMF
[A]
[D]