Right Side - Toshiba e-STUDIO2303AM User Manual

1 PREPARATION
 Right side
1. Platen Cover (optional)
Close this before start copying or scanning.
Depending on the region, the Platen Cover is installed as a standard part.
2. Side cover
3. Bypass tray
Place special paper such as thick paper, overhead transparencies, or tracing paper.
 P.25 "Loading paper on the bypass tray"
 P.28 "Loading an envelope on the bypass tray"
4. Automatic Duplexing Unit (optional)
Install this to make it possible to print on both sides of paper.
5. USB port
Connect a USB device to store scanned data or print files stored in the USB device.
12 Components
5
1
2
3
4