Toshiba e-STUDIO4500c Service Manual page 609

August, 2006
090 TELNET Operation
Settings
091 Web Operation
096 Rendezvous Operation
5832 HDD Formatting
Enter the SP number for the partition to initialize, then press #. When the
execution ends, cycle the machine off and on.
001 HDD Formatting (All)
002 HDD Formatting (IMH)
003 HDD Formatting (Thumbnail)
004 HDD Formatting (Job Log)
005 HDD Formatting (Printer Fonts)
006 HDD Formatting (User Info.)
007 Mail RX Data
008 Mail TX Log
009 HDD Formatting (Log)
010 HDD Formatting Log
011 HDD Formatting (DiskTopBinder)
5833 e-Cabinet Enable
Enables the e-Cabinet function. Then, the user names in the cabinet are enabled
for use with the POP server.
[0~1/1]
0: Disabled
1: Enabled
Disables or enables Telnet operation. If this SP is
disabled, the Telnet port is closed.
[0~1/1]
0: Disable
1: Enable
Disables or enables the Web operation.
[0~1/1]
0: Disable
1: Enable
This SP disables/enables Rendezvous operation.
This is a set of protocols that allows a device on an IP
network to automatically recognize and connect with
other devices (such as a printer) on a network. Once
a new device is connected to the network, it can be
used immediately by every computer on the network.
No special setup procedures or configuration settings
are required
1: Enable 0: Disable
5-117
SERVICE PROGRAM TABLES