Toshiba e-STUDIO4500c Service Manual page 629

August, 2006
6111 Adj Z-Fold 2
Adjusts the position of the second fold for the Z-folding unit.
6112 Book Staple Adj
This SP corrects the stapling postion of the booklet stapler when paper is stapled
and folded.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 B5 SEF
005 DLT SEF
006 LG SEF
007 LT SEF
008 12" x 18"
009 Custom
6113 Book Fold Adj
This SP corrects the folding postion when paper is stapled and folded.
001 A3 SEF
002 B4 SEF
003 A4 SEf
004 B5 SEF
005 DLT SEF
006 LG SEF
007 LT SEF
008 12"x18"
009 Custom Size
6114 Book Fold Repeat
This SP sets the number of times the folding rollers are driven forward and reverse
to sharpen the crease of a folded booket before it exits the folding unit. When set at
the default (0):
The folding blade presses the center of the stack into the nip of the folding roller.
The folding rollers rotated ccw to crease the booklet, reverse cw, then rotate ccw
again crease the booklet fold twice before feeding to the folding unit exit rollers.
0:2Reps-6:30Reps
Adjust Fold Position: Z-Fold Unit: Fold 2 Japan Only
Adjust Booklet Stapling Position Japan Only
[-75~+75/0.5 mm]
+ Value: Shifts staple position toward the crease.
- Value: Shifts staple position away from the crease.
Adjust Booklet Fold Position
[-3~+3/0.2 mm]
+ Value: Shifts staple position toward the crease.
- Value: Shifts staple position away from the crease.
Set Number of Folds
[0~6/1 reverse/forward feed.]
0: 2
1: 5
2: 10
3: 15
5-137
SERVICE PROGRAM TABLES
B132S923.WMF
B132S924.WMF
4: 20
5: 25
6: 30
Feed Out
Feed Out