Toshiba e-STUDIO4500c Service Manual page 476

ADDITIONAL INFORMATIONS
NOTE: Please refer to the below table to select most appropriate type of Middle
Thickness Paper Mode.
Type
"Middle Thickness Paper
Mode -1" (Default)
"Middle Thickness Paper
Mode -2"
"Middle Thickness Paper
Mode -3"
Side effects of various combinations of solutions
Side Effects
1. Stripper streaks
2. Color reproduction
3. Paper curl with Normal
paper
4. System stop control
condition
5. 1st Print Time will be
longer
6. Paper Feeding Interval
Adjustment
"X": Indicates a side effect
NOTE1: 1st Print Time in Final solution: 7sec to 14.5 sec (maximum)
NOTE2: During this adjustment, the printing speed will reduce during the first 3-5 A3/DLT sheets.
1st 5 pages: 43.75cpm, after that 45cpm (in e-STUDIO4500c)
1st 5 pages: 51.25cpm, after that 55cpm (in e-STUDIO5500c)
Effectiveness level for poor
fusing.
Less than previous temporary
solution B or B+
Same as previous temporary
solution B or B+
Better than previous temporary
solution B or B+
Previous Temporary Solution
Solution A Solution B
X X
(None) (None)
X X
X X
(None) (None)
(None) (None)
4-98
Stripper Streaks level.
Better than previous
temporary solution B or B+
Same as previous temporary
solution B or B+
Less than previous temporary
solution B or B+
Final Solution in this RTB
Solution B+
X See above table
X
(Only for the tray for
X
which Middle Thickness
Paper Mode is selected)
(Only for the tray for
X
which Middle Thickness
Paper Mode is selected)
(None)
See NOTE 1
(None)
See NOTE 2
April 2007
X
X
X
X
X