Toshiba e-STUDIO4500c Service Manual page 647

August, 2006
SP8-xxx: Data Log2
8 001 T:Total Jobs
8 002 C:Total Jobs
8 004 P:Total Jobs
8 005 S:Total Jobs
8 006 L:Total Jobs
These SPs reveal the number of times an application is used, not the number of
pages processed.
When an application is opened for image input or output, this counts as one job.
Interrupted jobs (paper jams, etc.) are counted, even though they do not finish.
Only jobs executed by the customer are counted. Jobs executed by the service
engineer using the SP modes are not counted.
When using secure printing (when a password is required to start the print job),
the job is counted at the time when either "Delete Data" or "Specify Output" is
specified.
When a copy job on the document server is printed, SP8022 also increments,
and when a print job stored on the document server is printed, SP8024 also
increments.
When an original is both copied and stored on the document server, the C: and
L: counters both increment.
When a print job is stored on the document server, only the L: counter
increments.
When the user presses the Document Server button to store the job on the
document server, only the L: counter increments.
When the user enters document server mode and prints data stored on the
document server, only the L: counter increments.
When an image received from Palm 2 is received and stored, the L: counter
increments.
These SPs count the number of times each
application is used to do a job.
[0~9999999/ 1]
Note: The L: counter is the total number of
times the other applications are used to send a
job to the document server, plus the number of
times a file already on the document server is
used.
5-155
SERVICE PROGRAM TABLES