Barco Display Tab
Figure 37: Barco Display Tab under Windows 2000 and Windows XP
Using the Barco Display Tab
Displays
All of the available display controllers that are of the same type
as the current barco display controller are shown here
graphically, with one display icon representing each output of a
display controller. The icon orientation reflects the display
resolution. Only those outputs with a display attached to them
are active. If an icon is grayed out, that indicates a output with
no output attached to it. When running DualView under Windows
2000 and Windows XP the desktop must be extended to include
each display, otherwise those outputs will not be visible to the
Barco Display Tab.
Hovering the cursor over a display icon will pop up a window
with information that identifies the display.
74
Single Source Master