Table of Contents
Advertisement
To change Video Contrast or Video Brightness manually:
1. Turn the control wheel to select the manual Contrast
(Brightness) control.
Contrast CAL position
Man Contrast adj
EXIT
2. Click the control wheel to enter the control.
3. Turn the control wheel to change the Video Contrast or Video
Brightness value.
4. Click the control wheel to confirm the change of the value.
5. Turn the control wheel to select EXIT. Next, click the control
wheel shortly to return to the Main menu.
To select the calibrated position:
1. Turn the control wheel to select the "Set to Cal position"
selection menu.
Contrast CAL position
Man Contrast adj
EXIT
2. Click the control wheel to switch to the calibrated position.
3. Turn the control wheel to select EXIT. Next, click the control
wheel shortly to return to the Main menu.
Additional information
If you change Video Contrast or Video Brightness manually, the
changed value is saved in the memory.
VIDEO CONTRAST
VIDEO CONTRAST
Operation
123
Advertisement
Table of Contents
Troubleshooting
