Operation
Using the Autoset* functions
* Not in DVI mode
The Autoset menu provides a set of functions to adjust the
display automatically.
When do you need to use the Autoset functions?
It is necessary to perform the Auto Gain and Auto Phase
calibrations in the following cases:
•
The first time you use the display on an analog video
•
After connecting or selecting another analog video source
It is necessary to perform the Automatic Geometry function in
case you notice the image geometry or positioning is not as
desired.
Required test pattern
To obtain good results with the autoset functions, it is necessary
to have a good image on which to perform the functions.
For Auto Geometry, the pattern should be an image that is filled
up to the edges, from left to right and top to bottom. The edges
of the image should have an intensity of at least 15% video
amplitude. E.g., a maximized Windows Explorer window would
be a good image.
For Auto Phase, the pattern should contain sharp black-white
transitions, like a line pattern or characters.
For Auto Gain, the pattern should contain parts that are
completely black (0% video amplitude) and parts that are full
white (100% video amplitude).
120