Table of Contents
Advertisement
Maintenance
2. Tilt the panel.
3. Unscrew the 4 sunken screws at the rear, fixing the glass
panel and bezel.
4. Unplug the cable plugged in on the bezel.
5. Remove the bezel with glass panel.
Cleaning instructions:
•
Dust, fingerprints, grease etc. can be removed by using a soft
damp cloth (a small amount of mild detergent can be used
on the cloth, NOT solvent).
•
Do not apply liquid directly to the LCD surface as excess liquid
may cause damage to internal electronics.
•
Take care not to touch the I-guard light sensor on the LCD
panel.
142
Advertisement
Table of Contents
Troubleshooting
