Controlling Video Contrast* And Video Brightness - Barco CORONIS 1MP System Manual

2 Click the control wheel. The Autoset menu appears.
Full Autoset
Automatic Geometry
Automatic Phase
Automatic Gain
EXIT
3 Turn the control wheel to select the function you wish to execute.
4 Execute the function as described below.
The Autoset menu contains the following items:
Full Autoset ................. Click the control wheel to perform all Autoset
Automatic Geometry ... Click the control wheel to adjust the image
Automatic Phase ......... Click the control wheel to adjust the video
Automatic Gain ........... Click the control wheel to adjust the video
Controlling Video Contrast* and Video
Brightness*
* Not in DVI mode
To enter the menu:
1 In the main menu, turn the control wheel to select the Video
Contrast or Video Brightness menu.
2 Click the control wheel to enter the Video Contrast or Video
Brightness menu. You can change the current setting manually or
select the calibrated position.
System manual Coronis 1MP
AUTOSET
functions (below) one after another.
geometry automatically. This function mea-
sures the start and the end of the incoming
video signal. It displays the complete active
video in the center of the screen and, if the
active video is smaller than the native panel
resolution and no scaling is selected (see
further), it puts black borders around the active
video window.
sampling phase and frequency automatically
levels (black and white) automatically
Display installation
36