Operation; Switching To Stand-By Position; Controlling The Display - Barco Coronis 5MP Installation & User Manual

Operation

Operating precautions
Continuous operation of the display with the same screen may
result in some image sticking on the LCD panel.
Over 10 hours operation with the same image content is not
recommended.
Switching on the display DPMS may decrease the risk of image
sticking (image retention).

Switching to stand-by position

When the display is on and no on-screen menus are visible, press
the control wheel (3) for a few seconds to switch the display in
stand-by.
When the display is in stand-by, press or turn the control wheel
to switch it back on.

Controlling the display

The control wheel (3) at the bottom (landscape orientation) or at
the side (portrait orientation) allows you to perform controls.
The control wheel is a rotation - click system. It provides the
following functions:
• Short click: Enter menus, confirm selections, and toggle
between different options
• Rotate: Browse through menus, increase or decrease
adjustment values
Navigating through the menus
• The menu system has a hierarchical structure, with several
levels. To display the on-screen menus, turn the wheel (3).
Operation
75