Barco FLM R22+ User Manual page 91

2:2 pull-down
The process of transferring 24-frames/sec film format into video by repeating each frame (used for PAL DVD's) as two
video fields. ( AD )
Artefacts
Undesirable elements or defects in a video picture. These may occur naturally in the video process and must be
eliminated in order to achieve a high-quality picture. Most common in analog are cross color and cross luminance.
Most common in digital are macroblocks, which resemble pixelation of the video image.
How to set up
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Image and press ENTER.
3. Use the ▲ or ▼ key to select Advanced settings and press ENTER.
The Advanced settings menu is displayed.
4. Use the ▲ or ▼ key to select Film mode and press ENTER to toggle between [auto] or [off].
Auto Detects for film and it starts to avoid deinterlacing artefacts, and it results in a perfect artefact-free display.
Off no detection for film mode.
When film with a banner is projected at the same time, and film mode is auto, the banner will shown possible artefacts as the
software will detect a film.
Image 9-75
Image 9-78
R59770179 FLM R22+ 15/03/2010
Image 9-76
Image 9-77
9. Image menu
87