The leakage area for this overlap is defined and will be excluded during black level adjustment.
How to adjust
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Alignment and press ENTER.
3. Use the ▲ or ▼ key to select ScenergiX and press ENTER.
4. Use the ▲ or ▼ key to select Black level and press ENTER.
Image 12-111
Image 12-114
5. Adjust the black level of area A until the black level of area A, B and C are equal. Use the Adjust function All, Red, Green and
Blue in the Black level menu.
A
RGB
R
12
G
13
B
11
Image 1
Image 12-115
Black level adjustment
Use the Reset function to bring all ScenergiX settings back to zero.
R59770179 FLM R22+ 15/03/2010
Image 12-112
C
B
Image 2
Image 12-113
12. Alignment menu
143