Avocent DSView Installer/User Manual page 98

78 DSView 3 Software Installer/User Guide
4. Click Add. The Add Authentication Service Wizard will appear. Click Next.
5. The Provide Authentication Service Name and Type window will open.
a. In the Name field, type a 1-64 character name for the RSA authentication service.
b. Select RSA SecurID from the Type menu.
c. Click Next.
6. The Specify RSA SecurID Connection Settings window will open. Type the 1-512 character
path to the sdconf.rec file, or browse to the file location. (This file is created by the RSA
Authentication Manager, but is located on the DSView 3 software client machine.) Then,
click Next.
The sdconf.rec file will be uploaded from the DSView 3 software client to the DSView 3
software server. This file will be used as the initial RSA configuration file for all DSView 3
software servers.
If some DSView 3 software servers require a different configuration, a different sdconf.rec file
must be configured. Additionally, some installations may require an advanced option file
(sdopts.rec) for load balancing. You may specify these files using the procedure to change
settings for the RSA SecurID external authentication service.
7. The Establish Connection with Authentication Service window will open briefly. If the
external authentication service is added successfully, the Completed Successful window
will open.
8. Click Finish. The User Authentication Services window will open with the new service listed.
After the service is added, one or more RSA user accounts must be added to the DSView
3 software.
NOTE: The node secret file for the server will not be created until the first RSA user logs into DSView 3.
To change settings for the RSA SecurID external authentication service:
1. Click the Users tab.
2. Click Authentication Services in the top navigation bar. The User Authentication Services
window will open.
3. Click on the name of the SecurID service.
4. Click Connection in the side navigation bar. The Authentication Service Connection Settings
window will open.
5. To change the name of the service:
a. Type a 1-64 character name in the Service Name field.
b. Click Save.
c. If that is the only change you are entering, click Close. Otherwise, continue with the
next steps.
6. To clear the RSA SecurID node secret for one or more DSView 3 software servers: