Avocent DSView Installer/User Manual page 163

3. To initiate a pull or push name operation (see Name Synchronization on page 103), click the
checkboxes to the left of one or more device name(s). To select all names on the page, click the
box to the left of Appliance Name at the top of the list.
• For a pull operation, click Pull Name.
• For a push operation, click Push Name.
Customizing the Power Devices Attached to Appliance window
The following fields may be displayed in the Power Devices Attached to Appliance window. Use
the Customize link to add or remove fields in the display. See Using the Customize link in windows
on page 12.
For information about Avocent SPC power device display fields, see the SPC Installer/User Guide.
For information about other power devices, see their product documentation.
• Name in Appliance - Name of the power device in the appliance
• Name in DSView - Name of the power device in the DSView 3 software database
• Status - Online or offline
• Description
• Version - Power device version, such as Avocent SPC Version 1.0k
• (Server Technology power devices only) Load(s) per Line Feed - Amperage load for each line
feed; power devices with multiple line feeds will have comma-separated values
• Total Load - Total amps currently used by the power device
• Poll rate - How often a supported managed appliance polls a power device
• Ports Installed - Total number of outlets on the power device
• Total Load Max - Maximum amperage load for the entire power device
• Total Load Min - Minimum amperage load for the entire power device
• (Server Technology power devices only) Model
• (Server Technology power devices only) Sequence Interval - Delay between changing an
outlet's status and then the next in a multi-outlet operation
• (Server Technology power devices only) Location
To add or remove a power device:
NOTE: To successfully add or remove a power device, the power device must be in the online state. Additionally,
to add a power device other than an Avocent SPC device, you must have a valid third party license; see Licenses
on page 31.
1. In a Units View window containing appliances (see Accessing Units View windows on
page 88), click on the appliance name. The Unit Overview window will open.
2. Click Manage Power Units in the Tools area. The Power Management Wizard will appear.
Click Next.
Chapter 4: Managing Units 143