Avocent DSView Installer/User Manual page 119

• For an IBM ASM RSA II embedded appliance, go to step 4.
• For a DRAC 4 embedded appliance, go to step 5.
• For a Compaq iLO embedded appliance, go to step 6.
• For an NEC IPF embedded appliance, go to step 7.
If you were in an appliance type Units View window when you clicked Add in the first step, go
to the next step.
4. For IBM ASM RSA II embedded appliances:
a. The Configure IBM ASM RSA II Settings window will open.
b. In the Appliance Name field, type a 1-64 character appliance name. The name is not
case sensitive.
c. In the Address field, type a 1-256 character IP address in dot notation form or a DNS
name. The address is not case sensitive.
d. In the Username field, type a 1-64 character username to be used to log in to the embedded
appliance. Usernames are case sensitive.
e. In the Password field, type a 1-64 character password to be used to log in to the embedded
appliance. Passwords are case sensitive.
f. Click Next.
g. The embedded device discovery will verify that a web server exists at the specified IP
address. If successful, the Select Option window will open.
h. Enable or disable the Allow target devices with the same name to be merged into a single
target device checkbox.
i. Click Next. Go to step 8.
5. For DRAC 4 embedded appliances:
a. The Configure DELL DRAC4 Settings window will open.
b. In the Appliance Name field, type a 1-64 character appliance name. The name is not
case sensitive.
c. In the Address field, type a 1-256 character IP address in dot notation form or a DNS
name. The address is not case sensitive.
d. In the Port field, type a TCP port number in the range 0-65535 where the appliance
will listen.
e. In the Username field, type a 1-64 character username to be used to log in to the embedded
appliance. Usernames are case sensitive.
f. In the Password field, type a 1-64 character password to be used to log in to the embedded
appliance. Passwords are case sensitive.
g. Click Next.
h. The embedded device discovery will verify that a web server exists at the specified IP
address. If successful, the Select Option window will open.
Chapter 4: Managing Units 99