Table 10.7: Task Events; Table 10.8: Unit Status Events - Avocent DSView Installer/User Manual

292 DSView 3 Software Installer/User Guide
Table 10.6: Unit Events (Continued)
Event ID
5:9
5:10
5:11
5:12
5:13
5:14
5:15
5:16
5:17
5:18
Table 10.7 lists the task events that may occur within a DSView 3 software system.

Table 10.7: Task Events

Event ID
6:1
6:2
6:3
6:4
6:5
Table 10.8 lists the unit status events that may occur within a DSView 3 software system.

Table 10.8: Unit Status Events

Event ID
7:1
7:2
7:3
Description
Location deleted
Department added
Department modified
Department deleted
Firmware file added
Firmware file modified
Firmware file deleted
Unit added
Unit modified
Unit deleted
Description
Task started
Task completed successfully
Task started manually
Scheduled task failed
Scheduled task failed
Description
Loss of communication (LCM)
Regained communication (RCM)
Automatic name push occurred
Event ID Description
5:28 Power on command issued
5:29 Power off command issued
Power cycle command issued
5:30
for <device>
5:31 Unit <unit name> rebooted
5:32 Unit reset
5:33 Unit identity light turned on
5:34 Unit gracefully powered off
5:35 System event log (SEL) cleared
5:36 Unit identity light turned off
Event ID Description
6:6 Task added
6:7 Task modified
6:8 Task deleted
6:9 Task failed
Event ID Description
7:4 Automatic name pull occurred
7:5 Automatic topology update occurred